User Guide

Before You Begin
Version 5.0 3
Installation
To install RISA-3D please follow these instructions:
1) Put the RISA-3D CD in your computer CD drive.
2) If the CD starts automatically go to step 4. If the CD does not start after
10 seconds click the Windows Start button and select Run.
3) In the Run dialog box type “d:\risacd” (where “d” is the label of your
CD drive) and then click the OK button.
4) Follow the on-screen instructions.
After you have installed RISA-3D, be sure to send us your registration card!
Technical Support
Complete program support is available to registered owners of RISA-3D and is
included in the purchase price. This support is provided for the life of the
program. See the RISA-3D General Reference or Help file for a list of your
support options.
The “life of the program” is defined as the time period for which that version of
the program is the current version. In other words, whenever a new version of
RISA-3D is released, the life of the previous version is considered to be ended.
RISA Technologies will support only the current version of RISA-3D.
Maintenance
Program maintenance provides all upgrades to RISA-3D, and discounts on new
products.
When your maintenance expires, you will be given the opportunity to continue
program maintenance on an annual basis. You are under no obligation to continue
program maintenance, of course, but if you decide to discontinue maintenance
you will no longer receive RISA-3D program upgrades and technical support.