User Guide

RISA-3D User’s Guide
Version 5.0
42
CRECT12X8
Change the member type by clicking the down arrow next to “Column”. Then
select “Beam” from this drop down list. Finally, we want the beam to be fully
fixed at both ends so select that option.
When you are done, you screen should look like the following:
Click Apply and we go back to the model view.
Here is what you’ll be drawing; a line from A to B:
Move to point A, grid location (0, 10, 0), and click. Now move right to point B,
grid location (21, 10, 0), and click. RIGHT click to stop drawing.