User's Manual

DUAL TIME FUNCTION:

This function is very useful should you travel away from

home to another time zone.

In the [TIME] mode, simply push the START/STOP to toggle

the Time1 / Time2 displays. Then hold the START/STOP

button for 2 seconds to choose the default display time.

LIGHT FUNCTION:

In any MODE you can simply push the LIGHT button and the whole screen

will light up and stay on for 3 seconds.

If auto light function is ON, the whole screen will light up and stay on for 3

seconds if any key is pressed.

be exit and returned to Normal Time screen automatically.

3. A chime sounds for 30 seconds if the Timer is counted down to 0

normally.

4. If preset value is less than 1 minute, and count-down repeat is

selected, a chime sounds for 1 second only each time the Timer is counted

down to 0.

5. The Timer will be stopped and reset automatically with a chime

sounds for 30 seconds, if it is counted up to the maximum (23 hrs, 59min,

59sec).

[ ] Alarm Mode:

By choosing a time, an alarm will sound each day at the

preset time. The alarm is a strong chime and can be im-

mediately shut off by pushing any button or will automati-

cally shut off after 30 seconds.

There are 4 independent daily alarms. Press the START/

STOP button to select the alarm.

Notes : If there is no key operation for 30 seconds, The Alarm screen will be

exit and returned to Normal Time screen automatically.