User guide

Overview

Desktop Management Interface (DMI):

Supports DMI through BIOS, which allows hardware to communicate within a

standard protocol creating a higher level of compatibility.

PC 99 Compliant:

The PDVIA is fully compliant with the Microsoft

PC 99 specification at both the

hardware and BIOS levels. The SDVIA also provides the colored keyboard

(P/S 2), mouse(P/S 2), Serial/Paralle/USB connector will make your system

installation and maintenance with less fuss.

Ultra DMA 33/66 Bus Master IDE:

Comes with an onboard PCI Bus Master IDE controller with two connectors that

support four IDE devices in two channels, supports Ultra DMA 66/33, PIO Modes

3 and 4 and Bus Master IDE DMA Mode 4, and supports Enhanced IDE devices.

Floppy:

Supports 3.5 (1.44MB or 2.88MB) floppy drive and Japanese standard Floppy

3 mode (3.5 disk drive: 1.44MB, 1.2MB, 720KB) and LS-120 floppy disk drives

(3.5 disk drive: 120 MB). BIOS supports IDE CD-ROM boot-up.

Super Multi-I/O:

Provides two high-speed UART compatible serial ports and one parallel port

with EPP and ECP capabilities. UART2 can also be directed from COM2 to the

Infrared Module for wireless connections.

IPMI Feature Connector:

The IPMI (Intelligent Platform Management Interface) connector can connected

with IPMI add-on card which is that inventory, monitoring, logging, and

recoverying control functions are available independent of the main processor,

BIOS, and OS. Platform management functions can also made available when

the system is in a powered down state. Please contact your retail for Rioworks

Management Card with this feature.