User guide

BIOS Setup

MODEM Use

IRQ

This determines the IRQ in which the MODEM can

use.

The choices: 3(default), 4, 5, 7, 9, 10, 11, NA.

Soft-Off by

PWRBTN

Pressing the power button for more than 4 seconds

forces the system to enter the Soft-Off state when the

system has hung.

The choices: Delay 4 Sec, Instant-Off (default).

Wake Up Events

PM events are I/O events whose occurrence can prevent the system

from entering a power saving mode or can awaken the system from

such a mode. In effect, the system remains alert for anything which

occurs to a device which is configured as On, even when the system is

in a power down mode.

VGA

When Enabled, you may set the LAN to awake the

system.

The choice: ON, OFF (Default).

LPT&COM

When On of LPT & COM, any activity from one of the

listed system peripheral devices or IRQs wakes up the

system.

The choice: LPT/COM (Default), NONE, LPT, COM.

HDD&FDD

When On of HDD & FDD, any activity from one of the

listed system peripheral devices wakes up the

system.

The choice: ON (Default), OFF

2-26