User guide

BIOS Setup

Advanced Chipset Features Setup

This Advanced Chipset Features section allows you to configure the system based on

the specific features of the built-in chipset. This chipset manages bus speeds and

access to system memory resources, such as DRAM and the external cache. It mus

be stated that these items should never need to be altered. The default settings have

been chosen carefully for your system in order to provide the optimal system

performance. You might only need to set up these values again by loading optimal

defaults or fail-safe defaults if you discovered the data stored in the CMOS was being

lost or not correct and system is not longer to boot again or wrong operations.

Note

Such a scenario may occur if your system has been mixed different speed DRAM chips

greater delay may be required to preserve the integrity of the data held in the slowe

memory chips.

2-15

Section 4

This field controls timing point for latching SDRAM

Bank 0/1;2/3;4/5

DRAM Timing

data. Leave on the default value.

The choice: SDRAM 10ns(Default), SDRAM 8ns