User guide

BIOS Setup
BIOS Setup
Typematic Rate
Setting
Key strokes repeat at a rate determined by the
keyboard controller. When enabled, the typematic
rate and typematic delay can be selected.
The choice: Enabled, Disabled (Default).
Typematic Rate
(Chars/Sec)
Sets the number of times a second to repeat a key
stroke when you hold the key down.
The choice: 6(Default), 8, 10, 12, 15, 20, 24, 30.
Typematic
Delay (Msec)
Sets the delay time after the key is held down before it
begins to repeat the keystroke.
The choice : 250(Default), 500, 750, 1000.
Security Option
Select whether the password is required every time
the system boots or only when you enter setup.
System The system will not boot and access
to Setup will be denied if the correct
password (Supervisor password) is
not entered at the prompt.
Setup
(Default)
The system will boot, but access to
Setup will be denied if the correct
password (supervisor or user
password) is not entered at the
prompt.
Note: To disable security, select PASSWORD
SETTING at Main Menu and then you will be asked to
enter password. Do not type anything and just press
<Enter>, it will disable security. Once the security is
disabled, the system will boot and you can enter
Setup freely
2-13