User guide

BIOS Setup
BIOS Setup
Table 2-2-2 shows how to configure the parameters of the IDE hard disks.
Item Options Description
Type None
Auto
User
If Selecting User, you need to fill
in all remaining fields, such as
Type, CYLS, PRECOMP, LANDZ
and MODE, on this selected item.
If the item AUTO is selected, only
item Mode can be set, the others
will remain 0. And when the
system boot up, system detect the
hard disk and configure it
automatically. None means no
device in the channel.
Size The capacity of the Hard Disk in
this channel. Please refer to the
documentation of the hard disk in
this channel.
2-8