User guide

BIOS Setup
BIOS Setup
Navigating through the menu bar
Use the left and right arrow keys to navigate the menu you want to be in.
To display a sub menu
Use the arrow keys to move the cursor to the sub menu you want. Then press <Enter>
A
# pointer marks all sub menus.
In Case of Problems
If, after making and saving system changes with Setup, you discover that you
r
computer no longer is able to boot, the Award BIOS supports an override to the
CMOS setting, which resets your system to its defaults. The other way is clear the
present CMOS information. (Refer to the jumper setting J22 on the page1-2).
The best advice is to only alter settings, which you thoroughly understand. In the end,
we strongly recommend that you avoid making any changes to the chipset defaults.
These defaults have been carefully chosen by both Award and RIOWORKS
TM
to
provide the maximum performance and reliability of the system. Even a sight change
to the chipset setup may also cause potential and unpredictable failure to the system.
2-3