User guide

Overview
Overview
Overview
Thank you for choosing RIOWORKS
TM
SDVIA . The SDVIA is a dual FC-PGA Socke
t
370 motherboard (M/B) based on the ATX form factor featuring the VIA apollo PR
O
133A chipsets. As high perform ance chipsets built in the M/B, the SDVIA can supports
dual Intel
®
FC-PGA Pentium III 533~1G+ MHz processor and 100/133MHz CPU
Front Side Bus (FSB). In the AGP bus performance, it supports AGP PRO/4X/2X mod
e
and pipelined spilt-transaction long-burst transfers up to 1066 MB/sec. According to
different customers requirements, SDRAM and VCM DRAM can be applied to th
e
SDVIA and the maximum memory size can be up to 2.0GB (1.5GB when FSB=133).
The on-board AMI IDE RAID controller provides the transfer rate up to 100MB/s pe
r
channel and RAID level 0 (Striping), 1 (Mirroring) and 0+1 (Striping+Mirroring)
.
Therefore, with SDVIA, people can gain higher system performance than before. Now
,
Enjoy every feature of SDVIA.
Unpack Your SDVIA
Remove all items from the box and make sure you have these items:
!"
One SDVIA motherboard
!"
One ATA/66 IDE ribbon cable
!"
One Floppy ribbon cable
!"
One bag of spare jumpers
!"
One Users Guide
!"
One CD containing drivers and utilities
If you discover any damaged or missing items, contact your retailer.
A
bout This User Guide
This manual explains how to build your system with SDVIA in detail. Please follow th
e
procedures carefully and pay special attention to the
IMPORTANT
,
WARNING
and
NOTE
sym bols .
1