User guide

BIOS Setup
BIOS Setup
2. By pressing <Del>immediately after switching the system on.
If the message disappears before you respond and you still wish to enter Setup
Program, restart the system from state On to state Off by pressing the "RESET"
button on the system case. You may also restart the system by simultaneousl
y
pressing <Ctrl>, <Alt>, and <Delete> keys. If you do not press the keys at the correc
t
time and the system does not boot as well, an error message will be displayed and you
will again be asked to...
PRESS F1 TO CONTINUE, DEL TO ENTER SETUP
Using Setup
In general, you use the arrow keys to highlight items, press <Enter> to select, use the
PageUp and PageDown keys to change entries, press <F1> for help and press <Esc>
to quit. The following table provides more details about how to navigate in the Setup
program using the keyboard.
Key Function
Up Arrow Move to the previous item
Down Arrow Move to the next item
Left Arrow Move to the item on the left (menu bar)
Right Arrow Move to the item on the right (menu bar)
Esc key
Main Menu  Quit and not save changes into CMOS
Status Page Setup Menu and Option Page Setup
Menu  Exit current page and return to Main Menu
PgUp Key Increase The numeric value or make changes
PgDn Key Decrease The numeric value or make changes
+ Key Increase The numeric value or make changes
- Key Decrease The numeric value or make changes
F1 key
General help on Setup navigation keys. Press F1 to pop
up a small help window that describes the appropriate
keys to use and the possible selections for the
highlighted item. To exit the Help Window press <Esc>
or the F1 key again.
F5 key
Load previous values from CMOS
F6 key
Load previous values from CMOS
F7 key
Load the fail-safe defaults from BIOS default table
F10 key
Save all the CMOS changes and exit
2-2