User guide
Hardware Installation
Overview
Hardware Installation
Item 5 through 11 are depicted in figure as above
5. Reset Switch (RESET)
This 2-pin connector connects to the case-mounted reset switch for rebooting you
r
computer without turning off and on your power switch. This is a preferred method
of rebooting to prolong the life of the systems power supply.
6. SCSI Hard disk Card Activity LED (4-pin SCSI_HDR, for optional)
The 4-pin connector can be connected to the SCSI hard disk card activity LED
connector, Read and Write activity by devices connected to the SCSI card will
caus e the front panel LED to light up.
7. Hard Disk Activity LED (2-pin HDD_LED)
This connector supplies power to the cabinets hard disk or IDE activity LED. Read
and write activity by devices connected to the Primary or Secondary IDE
connectors will cause the LED to light up.
1-14
+
+
+
PWR LED
PWR SW
SPEAKER
RESET
SCSI HDR
HDD LED