User guide

Hardware Installation
Overview
Hardware Installation
TIP
You may configure two hard disks to be both Masters using one ribbon cable on the
primary IDE connector and another ribbon cable on the secondary IDE connector.
IMPORTANT
If you want to have ATA/66 feature, you should use the ATA/66 cable that is differen
t
from ATA/33 cable.

4. IDE RAID connectors (Optional)
This Motherboard has oneon-board ATA-100 IDE RAID connector for four IDE ATA
33/66/100 devices.
















IMPORTANT

If you want to have ATA/66/100 devices, you should use the ATA/66 cable that is
different from ATA/33 cable.
1-13
PIN 1