User`s guide

Serverboard Manual
54
Appendix
WARNING
Before inserting or installing any add-on cards or hardware components in the ServerBoard,
always remember to FIRST disconnect the power cord.
Check that the system can be re-booted.
END
Troubleshooting Flowchart continued...
Press <Ctrl>+<Alt>+<Del> key simultaneously
to reboot the system

NO
Keyboard
may be
defective
YES
During system boot, press the <F2> key to enter BIOS Setup.
Select <Load Optimal Defaults> in the
<Exit> Menu of BIOS Setup
Power OFF the system and re-connect the floppy and IDE
cables to the onboard FDD and IDE connectors.
Power ON the system and check to see that
the system can boot successfully.
IDE cable or
Hard Disk may
be defective
NO
YES
If the system boots up successfully, but the Operating System
still does NOT start up, then you will need to re-install the
operating system you intend to use on this system
(i.e. Win98,Win NT, Win2000, etc.)