User`s guide

BIOS Setup

BIOS

Setup

* Select Yes and press <Enter> to load the default conﬁguration.

If, during boot up, the BIOS program detects a problem in the integrity of values stored in

CMOS, it displays these messages:

disCard Changes

If, during a Setup Session, you change your mind about changes you have made and

have not yet saved the values to CMOS, you can restore the values you previously saved

to CMOS.

Selecting “Discard Changes” on the Exit menu updates all the selections and displays this

message:

Setup Conﬁrmation

Load previous conﬁguration now?

[Yes] [No]

save Changes

Selecting “Save Changes” saves all the selections without exiting Setup. Selecting this

option will display this message:

Setup Conﬁrmation

Save conﬁguration changes now?

[Yes] [No]

* Select Yes and press <Enter> to save conﬁguration changes and continue

working in BIOS Setup.

You can return to the other menus if you want to review and change your selections.

load setup deFaults

To load the default values for all the Setup menus, select “Load Setup Defaults” from the

Main Menu. The program displays this message:

Setup Conﬁrmation

Load default conﬁguration now?

[Yes] [No]

The CMOS values have been corrupted or modiﬁed incorrectly (perhaps by an application

program that modiﬁes stored CMOS data.)

Press <F1> to resume the boot or <F2> to run Setup with the ROM default values already

loaded into the menus. You can make other changes before saving the values to CMOS.

System CMOS checksum bad - run SETUP

Press <F1> to resume, <F2> to Setup

* Select Yes and press <Enter> to load the previous conﬁguration.