User`s guide

Serverboard Manual
ii
attention: read First!
¡INSTALLATION WARNING!
Use Caution When Installing the ServerBoard into the System Chassis
The components underneath the PS/2 Mouse/Keyboard connectors around the mounting
hole are very FRAGILE and can be knocked off of their soldered positions, resulting in
IRREPARABLE DAMAGE during installation when sliding the board into a system chassis.
Gently install the ServerBoard into the chassis, and use a Mylar Sheet to cover and protect
the underside of the ServerBoard during installation. Take care NOT to scrape the bottom of
the ServerBoard on the chassis stand-offs and mounting holes.
These components are necessary for many different operations, including the Mouse
and the Keyboard. If you damage any of these chips, one of the symptoms is that the
ServerBoard will NOT respond to key strokes through the PS/2 port and the ServerBoard will
have to be replaced. Other symptoms include the loss of response or functionality in any of
the rear I/O ports. Contact your authorized dealer for more information.
The Damage noted here in this WARNING may require the ServerBoard to be replaced.
Due to the Nature of the Damage, this may be considered Out-of-Warranty Damage. Make
certain that ALL documented procedures are followed correctly.
Scr e w -
Hole