User`s guide

Serverboard Manual
38
BIOS
Setup
PhoenixBIOS Setup Utility
Advanced
Console Redirection Item Specific Help
COM Port Address: [Disabled]
Console Connection: [Direct]
Baud Rate: [19.2K]
Flow Control : [CTS/RTS]
Console Type: [ANSI]
Contiune C.R. after POST [On]
If enabled, it
will use a port
on the motherboard
F1 Help Select Item –/+ Change Values F9 Setup Defaults
ESC Exit Select Menu Enter Select
»
Submenu F10 Save and Exit
Console redireCtion submenu
This submenu controls the configuration to remotely control the system.
Use the following chart in configuring the Console Redirection submenu:
Feature Options Description
COM Port Address Disabled
Onboard COM A
Onboard COM B
If Enabled, it will use a port on the serverboard.
Console Connection Direct
via modem
Indicate whether the console is connected directly to
the system or a modem is used to connect.
Baud Rate 300
1200
2400
9600
19.2K
38.4K
57.6K
115.2K
Enables the specified baud rate.
Flow Control None
XON/XOF
CTS/RTS
Enables Flow Control.
XON/XOF is software flow control
CTR/RTS is hardware flow control
Console Type vt100
vt100 8bit
ANSI 7bit
ANSI
vt100 plus
UTF8
Specifies a console type.
Contiune C.R. after POST Off
On
If enable, it will use a port on the motherboard.