User`s guide

Overview

serverboard speCiFiCations

Processor AMD Dual Opteron Socket 940 CPUs

with HyperTransport at 1600 MT/s

* Built-In Memory Controller Hub (MCH)

Chipset * AMD 8111 (HyperTransport I/O Hub)

* AMD 8131 (PCI-X Tunnel)

Memory * 4+4 sockets for Registered PC3200/PC2700/PC2100 ECC DDR DIMMs

* Supports total system memory size of 16 GB

Internal I/O connectors * Floppy Connector (Floppy Controller supports 1.44 MB, 2.88 MB,

Japanese Floppy 3 Mode and LS-120 ﬂoppy disk drives)

* Thin-Type Floppy Connector for Slim Floppy Drives

* 2x IDE 40-pin connectors (BIOS supports IDE CD-ROM boot up)

* 2x USB 1.1 Headers for 4 extendable USB ports

* UART 16550 serial port header (for COM2)

* AMC Connector for BMC (Baseboard Management Controller) module

On-Board VGA ATI RageXL with 8MB Memory

On-Board Dual LAN 2x Broadcom BCM570x Gigabit Ethernet controllers

* Fail-Over Support

Expansion Slots * 2x PCI-X 64 bit / 133/100 MHz

* 2x PCI 64 bit / 66/33 MHz

* 2x PCI 32 bit / 33 MHz

Rear Panel I/O 1x UART 16550 serial port (COM1)

2x onboard USB 1.1 connectors

VGA port for on-board ATI RageXL chip

2x GigaBit Ethernet LAN RJ-45 ports

PS/2 mouse and keyboard connectors with Wake-Up function

System Management AMC connector for Baseboard Management Controller

Hardware Monitor ADM1026 (CPU Thermal, Fan, Voltage, Intrusion)

Super I/O NS87360

IPMI 1.5 (optional with Remote Management Card)

SmartWatch for hardware problem alerts

Fault-Tolerance, Fail-Over Support and Timing, Alert on LAN ready

System BIOS 4Mb Flash EEPROM with Phoenix BIOS

I2C support. SMBIOS 2.3 and DMI 2.0 compliant

Secure Boot, Multiple Boot

Form Factor Extended ATX form factor (12” x 13”)

EPS 12V power connectors (24 pin + 8 pin)

Serial ATA

(Option)

Four (4) integrated Silicon Image 3114 Serial ATA ports

Supports RAID 0,1,10

Only AMD Opteron 246 or higher supports DDR 400 memory.