User guide

Table Of Contents
Using the FM Tuner
Return to Pg.1
Page 21
Using the FM Tuner
By pressing the CD-FM button on the RioVolt or the VOLUME/CD-FM/
MODE click wheel on the remote control you can toggle between playing
CDs and listening to FM radio stations.
Press and to tune the FM frequencies in 0.1 intervals.
Press and hold or to scan through the FM frequencies for available
stations.
Press MODE to select whether you want it played in STEREO or not.
Press +10/EQ to select whether you want it played with DBB or not.
Creating Presets
1. Tune the RioVolt SP250 to the desired station frequency using and .
2. Press PROGRAM to mark the station.
MEMORY will appears in the display followed by CHANNEL # where # is a number from 1-20.
3. Select the Preset Number you want by pressing or to increase or decrease the number.
Each time you press PROGRAM, it will increase the CHANNEL # by one.
Recalling Presets
1. Press NAVI/MENU to bring up the Presets.
2. Press and to cycle through the stored Presets until you locate the one you want.
The Remote Control
The Remote Control Cable plugs into the Headphones
Port on the side of the RioVolt. The headphones then plug
into the end of the Remote Control.
NOTE: To buy the upgraded remote control
with display, got to www.riohome.com.
Remote Control Buttons
VOLUME / CD-FM / MODE Click Wheel
VOL
Press the click wheel towards the + to increase volume.
Press the click wheel toward the - to decrease the
volume.
CD-FM
Press in and hold the click wheel for 1.5 seconds to
toggle between playing CDs and listening to FM stations.
Press and to tune to your favorite radio stations.
MODE
Press the click wheel in and let go to toggle through the Repeat/Shuffle modes.
HOLD Switch
Slide Hold Switch ON in the direction of the arrow to lock buttons or OFF to unlock the buttons.
Hold
Switch