User guide

The Setup Menu
Return to Pg.1
Page 19
9. Press to activate the Shuffle Mode screen.
By default all of the option checkboxes will be selected. You can select
multiple options by marking all of the checkboxes or none at all by clearing
all of the checkboxes.
10. Press or to move the arrow to the checkbox option you prefer.
11. Press to mark or unmark the checkbox.
12. Repeat until you’ve completed making your selections.
13. Press to deactivate the Shuffle Mode screen and to enter your selection.
14. Press to highlight the intro tab.
15. Press to activate the Intro Mode screen.
This option allows you to decide whether or not you want to be able to
play just the introduction pieces of tracks by pressing the Mode button on
your RioVolt or on the remote control.
16. Press or to move the arrow to the checkbox option you prefer.
17. Press to mark the checkbox.
18. Press to deactivate the Intro Mode screen and to enter your selection.
This completes the list of options in the Mode menu group.
User EQ
The last menu group tab is user EQ, which allows you to create your own EQ
Preset by adjusting the Bass Boost, Tr e bl e B o o s t , Bass Corner
Frequency, and Treble Corner Frequency.
Bass Boost
• Controls the volume of the bass frequencies in the music. Increasing the
level, increases the amount of bass you'll hear.
Tre b l e B o o s t
• Controls the volume of the treble frequencies in the music. Increasing the level, increases the amount of
treble you'll hear.
Bass Corner Frequency
• Sets the highest frequency affected when the bass level is adjusted. The higher the corner frequency, the
wider the range of bass frequencies affected. (e.g. If the bass corner frequency is set at 200 Hz, then all
frequencies from 20Hz - 200Hz will increase in volume when the bass level is increased)
Treble Corner Frequency
• Sets the lowest frequency affected when the treble level is adjusted. The lower the corner frequency, the
wider the range of bass frequencies affected. (e.g. If the treble corner frequency is set at 4,000 Hz, then all
frequencies from 4,000Hz - 20,000Hz will increase in volume when the treble level is increased)
1. Press to highlight the user EQ tab.
2. Press to select the user EQ tab and to highlight the b. boost tab below.
3. Press to activate the Bass Boost screen, which will then display the
sliding bar scale for the bass range.
4. Press to increase the bass boost, represented by the number in the slide
bar or press to decrease the bass boost.
5. Press to deactivate the Bass Boost screen and to enter your selection.
6. Press to highlight the b.c.freq tab.