User guide

Using Your RioVolt SP250
Return to Pg.1
Page 12
The Joypad Controls:
Play/Pause — Press once and hold to turn the RioVolt on and to play the
first song in the current selection.
Pressing Play/Pause while a song is playing pauses the song and the song title in the
display blinks to indicate that it is in Pause mode.
In NAVI Mode — Scrolls up through folder and track choices.
In MENU Mode — Selects menu tabs and options.
Fast Forward — Press once to skip to the next track.
Press and hold down to scan forward through current track.
In NAVI Mode — Selects folders and tracks.
In MENU Mode — Moves forward through the available Setup Menu tabs.
In FM Mode — Press once to raise the radio frequency by 0.1 or press and hold to scan for radio stations.
Rewind — Press once to return to a previous track.
Press and hold down to scan backwards through current track.
In NAVI Mode — Scrolls back to previous folder choice and exits Navi Mode.
In MENU Mode — Moves back through the available Setup Menu tabs.
In FM Mode — Press once to lower the radio frequency by 0.1 or press and hold to scan for radio
stations.
Stop — Press once to stop or hold to turn off.
In NAVI Mode — Scrolls down through folder and track choices.
In MENU Mode — Backs out of a menu option or exits the Setup Menu
system.
The Hold Switch
The Hold Switch is located at the side of the RioVolt.
• When in the ON position, the Hold Switch locks all of the buttons on
the RioVolt and does not allow any changes to be made to the current
settings.
A padlock symbol appears at the top of the display when the Hold Switch is
enabled.
• When in the OFF position, the Hold Switch releases the buttons and
allows changes to be made.
NOTE: The Hold Switch does not turn the RioVolt power on or off. It only locks and
unlocks the buttons to avoid the RioVolt being activated accidentally.