Instructions for use

Facial Steamer (SUFA2)

STEP 1 Adjust the angle of the mist nozzle to direct the steam onto the

desired area of your face during treatment. NOTE: The mist nozzle only

adjusts up and down and not side to side.

STEP 2 Insert the mains plug into your power supply and turn on the

power button, the indicator light will illuminate red. NOTE: The steamer

will take approx 1 minute to heat up before any steam

is produced.

STEP 3 Place your face no closer than 10cm away from the mist nozzle.

NOTE: We recommend five treatments per

week, each treatment lasting no longer

than ten minutes.

STEP 4 To finish rinse your face with cold

water and pat dry.

How To Use