User guide

6
APPLYING THE BASE COLOUR
You can use any of the nail art colours as your base colour using the base
brush, or alternatively, use any ordinary nail polish as a base colour.
STEP 1
Do not overload the brush with polish and
remember, best results are obtained when thin
layers of polish are applied.
STEP 2
Starting in the centre and approximately 1mm from
the cuticle, brush towards the tip.
STEP 3
Then proceed with the sides. Once the nail is
complete, recap the bottle and allow your nails to
dry before proceeding.
The double ended applicator features detailing pen and fine line brush. Also
on the base of each bottle is a pin for unblocking any polish in the shaft of
the detailing pen.
REVEALING THE PEN
Simply pull the top off. No turning is required.
REVEALING THE BRUSH

other, unscrew the top anti-clockwise and reveal
the brush.
USING THE PIN
The pin is located on the underside of the bottle.
Removing the sticker will release it. Use it to push
down the nib of the pen should it become blocked
or dry up. Re-attach to bottle after use.

1 1
2 2
3 3