User guide
11
will achieve perfect results every time.
Can I use my own nail varnish for printing?
colour pigmentation and suitable consistency.
Can I remove a printing mistake from my nail without
having to paint the whole nail again?
lightly wipe over the mistake.
Can I use ordinary nail polish remover to clean the
tools and plates?
this makes it impossible to pick up the ink. Only use the
acetone solution supplied.
Do I need to clean the plate after each application.
you do not need to clean the plate each time, unless you
have excessive build up of polish on the printing plate
which is effecting print quality. Always clean the plate if
you are changing the design or using a different colour.
The stamp is not transferring the design to my nail.
of problems is not working fast enough and the nail
art polish drying on either the printing plate or on the
stamp.
between printing.
The stamp only seems to pick up part of the design.
the nail art polish dries, it will cause bits of the design to
be missed.
but do NOT press too hard.
I can’t seem to line up my designs. Am I doing
something wrong?
angle to the nail so you can see both surfaces and roll
the design onto the nail.
AFTERCARE AND ADVICE










