User guide

11
STEP5
With the (-) ball contact touching the skin and the (+)
ball remaining on the patch, slowly and gently move
back and forth along the patch for 60 seconds.
Increase the power until a steady tingling is felt.
STEP6
Repeat the process across the other patch.
Continue treatment by alternating between patches
for 10–30 minutes (5–15 minutes on each patch).
STEP7
The patches may remain on the face for up to 1 hour
to continue gently infusing.
After removing patches, you can massage any
residue into your skin.
STEP8
After use, switch the unit off. Press and hold the
programme/on/offbuttonfor2seconds.
Note:If unit is left on, it will automatically switch off
after 10 minutes.
PATCHES INFORMATION
• Themajorityoftheinfusionhappensinthefirst5–15minuteson
each treatment area, but the patches may remain on the face for
up to 1 hour.
• Retinoleasilybreaksdown,thereforepleasestoreyourpatches
in a cool dry place away from sunlight. You may even prefer
to store them in the refrigerator to have a cooling gel patch for
treatment.
• Retinolcanmakeyourskinmoresensitivetothesun.Afteruse,
we recommend using a high factor sunscreen.
• Ensurepatchesarewelladheredtothefacebeforetreatmentso
they don’t peel off.
• Use a gentle motion when moving the ball contacts over the
patch and the skin.
• Thepatchesaredesignedforsingleuseonly.
• To purchase more conductive gel or collagen & retinol
patches, use the accessory form or call our careline on:
[phone].
5
8
6
60
7