User guide

7
RF-Polar
™
TREATMENT GEL
ALWAYS apply RF-Polar Treatment Gel before
placing the wand on the skin.
IMPORTANT: If RF-Polar Treatment Gel is
not applied there is a risk of skin burns.
RF-Polar Treatment Gel has been specially formulated to ensure
the safety and efficiency of this product and NO substitutions
should be used.
NOTE: If you feel a slight warming sensation whilst applying the
gel, do not worry, this is completely normal.
BEFORE TREATMENT
Find a comfortable position. Make sure that you have everything
you need close at hand.
• Remove any jewellery from the ‘Treatment Zone’.
• Ensure your chosen ‘Treatment Zone’ is clean and dry.
• Makesureyoucanreachtheentiresurfaceofyour‘Treatment
Zone’ with ease and that the flexible cord will stretch the
required distance.
• Dependingontheareayouaretreating,itmaybeusefulto
have a mirror.
• WerecommendstartingtreatmentontheLOWEST HEAT
LEVEL indicated by ONE BLUE LIGHT ON THE CONSOLE.
You may increase the ‘Heat Level’ as and when you feel
comfortable by pressing the ON/OFF button briefly.
PATCH TEST
Always do a patch test with the RF-Polar Treatment Gel and wand.
Select an area on your inner arm and follow ‘Instructions For Use’.
Wait 24 hours. If irritation occurs do NOT continue treatment.
TREATMENT GEL