User guide

6
LIPOVACUUM
™
STEP 1
Plug the mains cable into the unit and
into your power supply. Press the on/off
button. The filter light will flash red.
Important: Keep the unit switched on
during this procedure.
STEP 2
Twist the filter anti-clockwise until the
outline circle lines up with the line on the
unit. Pull the filter out of the unit.
STEP 3
Insert the new filter and twist clockwise
until the solid circle lines up with the line to
lock into place.
STEP 4
The filter warning light will now turn off.
Note: If the filter warning light is on,
but not flashing, the filter is not fitted
correctly. The unit will not work without
a filter in place or if the filter is incorrectly
fitted. In this case, remove and reinsert
the filter correctly.
CHANGING THE FILTER
1
2
3
4
The life expectancy of the filter is approximately 50 hours. If the red filter light is flashing the filter needs
replacing. You can still use the Lipovacuum, but we recommend you change the filter as soon as possible.
Contact Rio Customer Care on 01242702345oremail[e-mail] for replacement filters.