User guide

4
LIPOVACUUM
™
STEP 1
Connect the hose to the hose connection
point and the selected treatment head by
simply pushing until it clicks into place.
STEP 2
Connect the mains cable to the back of the
unit and into your power supply. Position
your unit on a flat, firm surface.
STEP 3
Press the on/off button to turn the unit on.
The blue lights around the start button will
flash.
STEP 4
When you are ready to begin press
the start button, the light will stay
on, and the vacuum pump will start.
The pump will run for 60 minutes before
automatically stopping.
STEP 5
The unit will default to the Fatty Tissue
Breakdown mode.
Press the mode button to cycle through
the 4 modes and select the one you
require.
STEP 6
Use the power + or – buttons to select the
power level.
1
2
3
INSTRUCTIONS FOR USE
4
5
6