Installation manual

Rinnai Australia 8 Operation & Installation Manual
REMOTE / THERMOSTAT CONTROL
BUTTON AND DISPLAY FEATURES
Item Feature / Function Symbol Description
1
Time of day Displays time of the day in hours and minutes,
‘AM’ or ‘PM’. The time is displayed when the
thermostat is ‘ON’ or ‘OFF’
2
Day of week
‘SU - SA’
Displays the current day of the week. The day
is displayed when the thermostat is ‘ON’ or
‘OFF’.
3
Current room temperature
display
Displays the current temperature.
The temperature range is 7°C - 32°C.
4
Setting temperature display
‘SET’
When the thermostat is ‘ON’, the programmed
(set) temperature will be displayed.
5
Transmit indicator Indicates that the thermostat is transmitting to
the receiver, the symbol will appear on the
LCD for 1 sec.
6
Battery low indicator Indicates when the battery power is below an
acceptable level.
7
9
Automatic mode indication
Manual mode indication
‘MANUAL’
‘AUTO’
Indicates if the thermostat is in manual or
automatic mode.
8
Programming mode
indication
‘PROG’
Indicates that the thermostat is in programming
mode.
10
Up
‘UP’
Increase hours, minutes, day or temperature
11
OK Enter
‘OK’ ‘ENTER’
Accepts the current function and advances to
the next function.
12
Power ‘ON’ / ‘OFF’ (+ OK) ‘PWR’ + ‘OK’
Switches the thermostat ‘ON’ and ‘OFF’. To
turn ‘ON’ press and release the ‘PWR’ and
‘OK’ Buttons at the same time this will turn the
thermostat ‘ON’ to the most recently
programmed working mode.
13
Automatic / Manual /
Flame Mode
‘A / M’
Toggles between automatic, manual and flame
mode.
14
Time ‘T’
Initiates time and day of the week
programming (must press and hold for 2 or
more seconds when the thermostat is ‘OFF’).
15
Down ‘DOWN’
Decrease hours, minutes, day or temperature
16
Program ‘P’
Initiates the programming mode (must press
and hold for 2 or more seconds when the
thermostat is ‘OFF’).
17
Flame Indicator
Indicates the flame setting.
The Flame symbol graphically indicates which
of the 7 graduated settings between Low and
High flame when the burner is on.
In AUTO or MANUAL temperature mode, if the
burner is OFF due to room temperature being
reached the symbol will modulate UP and
DOWN. This is to indicate that the unit is still
ON even though there are no flames visible in
the appliance.