Installation guide

20 | RDV3611 Installation Manual: 11156-A 01-12
Log set installation
The log set (burn media) is packaged separately and consists of five log pieces and three
moulded rocks. Handle the log set with care to avoid chipping.
It is important you position the pieces as shown below as incorrect placement can create
carbon build up and affect performance.
Malfunctioning due to improper
log and rock placement is not
covered under warranty. The unit
must NEVER be used with broken
logs, or used with other burn
media, except Rinnai Rockwool.
Moulded rocks
The rocks form an important
part of the log set and must
be positioned as shown on
the following page. There are
three distinct shapes—these are
identified in the diagram.
Front left rock
Front base
left log (with
moulded rock)
Front middle
left log
Top log
Front base
right log
Front middle
left log
Triangular
shaped rock
Round flat
rock
Front le rock Round flat rock Triangular
shaped rock
Final log set layout
Moulded rock shapes