Installation guide
18 | RDV3611 Installation Manual: 11156-A 01-12
Gas connection
The gas connection from the control valve is a ½ “ BSP male flare fitting. This connects
straight into the gas control on the lower left hand side of the appliance.
Gas pipe sizing must consider the gas input to this appliance, as well as other gas appliances
in the premises.
440
C
L
190
60
Flared Union
Connecon Access
Gas Control
To access the gas connection, remove the upper and lower
bracket (also called the service access panels). The brackets can
be removed by undoing the screws shown below at each end.