Installation manual

Rinnai Australia 25 Installation Manual
SPECIFICATIONS
GENERAL SPECIFICATIONS
Note: Rinnai reserves the right to change specifications without notice
Models RDV3610ETR(N/L) / RDV3611ETR(N/L)
Model Name
Symmetry
®
Gas Log Flame Fire
Features Balanced Flue Inbuilt Gas Space Heater
Burning log effect
Glass front
Convection Fan, top warm air outlet
Wireless Remote control/thermostat, 7 day programmable timer
Installation Inbuilt only
Combustion Method Ceramic top pan burner - bunsen burner type
Flue Balanced Co-Axial Flue,
Inner = 100 mm or 4 ‘Outer = 170 mm or 6 x 5/8’, for Flueing
configuations refer page 30
Gas connection 15mm (1/2”) male flare
Gas types Natural Gas / Universal LPG / Propane
Ignition Continuous Spark Electronic Ignition
Input / Output Refer data plate and energy rating label on appliance
Power Consumption High 50 W, Standby < 0.3 W
1500 mm cord is supplied with a 3 pin plug on right hand side of
appliance
Safety Devices Overheat Switches
Electrical Fuse
Flame Failure Sensing System (FFD)
Power Failure Protection
Temperature Control Thermostatic, temperature control range 17 - 32°C
Weight 75 Kg - uncrated - no Flue
For other appliance specifications refer to appliance data plate.
NOTE