Operating instructions

Rinnai New Zealand Limited RDV3610 Operation Manual: 11620-D
04-10
18
Operation without the controller
If you lose your controller or the batteries go at after starting, you can still operate your unit.
Press and release the ON/OFF button. This will start the electronic spark and the Power LED
will be permanently illuminated. The pilot will ignite rst and then automatically go to the high
setting (stage four modulation). Pressing the ON/OFF button again will turn the unit off.
Under gas failure conditions, the appliance will go into lock out after sparking for one minute.
Under lock out the Power LED will remain illuminated. To start the appliance again, press and
release the ON/OFF twice after gas supply resumes.
In the event of a power failure the Symmetry RDV3610 will turn off and will need to be
manually turned on again when power is restored. This is a safety feature.
Remote sensor receiver
Red power
LED
ON/OFF button
RDV36