Operating instructions

Rinnai New Zealand Limited RDV3610 Operation Manual: 11620-D
04-10
16
Programming your controller
Tobegin
programming
With the controller off, press and hold the ‘P’ button for two seconds to
initiate programming. The LCD will display ‘PROG’, ‘Pd’ and the time at
which the controller is currently set will ash. Period 1 can now be set.
Settingtheday
oftheweek
1. Press and release the ‘UP’ or ‘DOWN’ button to change the day of the
week. Scrolling order is as follows:
MO  TU  WE  TH  FR  MO TU WE TH FR  SA  SU  SA SU  MO TU WE TH
FR SA SU
2. To accept the selected day(s) of the week press ‘OK’
Settingthe
periodstarting
time
1. After setting the day the AM/PM settings will ash. To set the P1
starting time, press and release the ‘UP’ or ‘DOWN’ button for the hour
setting. Ensure that the AM/PM is set correctly.
2. To accept press ‘OK’.
3. The minute setting will now ash, adjust as in step 1 and press ‘OK’ to
accept.
Settingthe
temperature
1. After setting the time period the temperature will ash. Press and
release the ‘UP’ or ‘DOWN’ button for two seconds to adjust.
2. To accept press ‘OK’
Period 1 is now set for the day(s) of the week you have chosen. The LCD
will display P2 to indicate Period 2 which can now be set for the same
day(s) of the week. Repeat programming process for remaining periods.
If you want to check what has been programmed, press ‘P’ for two seconds and select ‘OK’
continuously to cycle through the settings for each period.