Operating instructions

Rinnai New Zealand Limited RDV3610 Operation Manual: 11620-D
04-10
12
Wireless controller
Your wireless controller is designed to be wall mounted on a bracket (supplied
with the controller) within 10 m of the re.
The controller houses the thermostat that senses the room temperature and
communicates information back to the Symmetry RDV3610 via radio frequency. It
needs to be positioned in the same room as the Symmetry RDV3610 and the area
that requires heating—a place not subject to temperature uctuation. For example; if placed
near a door subject to cold drafts, the controller will sense the room is much colder than it is
and the RDV3610 will keep heating the room, when in reality the set temperature has been
reached.
Ideal position for the controller is:
• Away from possible drafts in the room
• Away from direct sunlight
• Suitable distance away from the heater (between 2 - 10 m)
• Ideally 1.5 m from the oor (approximately at chest height when standing)
Battery type: 2 x AA batteries
Battery life: approximately 12 months
Controller dimensions: H - 140 mm, W - 80 mm, D - 20 mm
When the batteries are changed all settings will be lost and the controller will revert back to
the initial setup screen.
A/M PWRT P
DOWN
UP
OK
Temperaturedisplay, displays
current room temperature.
Transmitindicator, indicates the wireless
controller is transmitting to the receiver. The
symbol will appear in the LCD for one second.
Batteryindicator, symbol
will ash when batteries need
replacing. Wireless controller will
remain functional for ve days
(approx.) before shutting off.
Flameindicator, indicates
ame height. When in manual or
automatic modes, the heater will
switch off if the room temperature
reaches the set temperature.
When this occurs, the ame
indicator will rise and fall every few
seconds to indicate the RDV3610 is
still operational.
Timeofdayanddayofweek
indicator
Settemperatureindicator,
when the wireless controller is
on, the programmed temperature
will be displayed. In ame mode,
only the ame setting (F1-F7) will
display.
Modebutton, toggles between
automatic, manual, and ame
modes.
Operationmodeindicator,
when in ‘ame mode’ the display
will be blank.
Powerbutton, PWR and OK
pressed together switches the
wireless controller on (child lock
safety feature). PWR switches the
controller off.
UP, OK and DOWN, UP/DOWN: Changes hours,
minutes, day or temperature. OK: Accepts the current
function and advances to the next function.
Program, indicates programming
mode, press and hold for two
seconds.
Initiates the time and day of the
week programming, press and
hold for two seconds.