Installation manual

Rinnai New Zealand Limited RDV3610 Installation Manual: 11658-E
05-10
9
Installation guide overview
Build frame and complete electrical
connection.
This overview is intended to provide installation information at a high level. Further detail on
each of the steps are provided in the following pages.
Install brackets, Symmetry unit and x
unit to frame. Install ue and complete
gas connection.
Install ue restrictor (if required), log
set, test pressures and establish ame
pattern.
Fit inner frame, outer frame and mesh
guard (if purchased)
Complete commissioning checklist.
Fit cladding, ensuring that non-
combustible cladding is installed above
the unit (p. 7).
Install ducting kit (if purchased) and
gas pipe.