Installation manual

Rinnai New Zealand Limited RDV3610 Installation Manual: 11658-E
05-10
12
Fixing the unit to the frame
The Symmetry RDV3610 comes pre-assembled with the burner already in position. For all
installations the unit MUST BE positioned on a level surface.
1. Position the unit inside the cavity.
2. Bend and secure the two metal stand-offs supplied with the unit into position. These
provide the required 150 mm minimum vertical clearance to the upper lintel.
3. Fix unit to frame with the four mounting brackets. These act as seismic constraints as well
as providing the horizontal clearance to the frame.
4. Install glass front, this will help protect the unit while the remaining installation work
is completed. The carton in which the Symmetry is packaged has a cardboard cut-out
that is the same size as the glass frame. This can also be used to protect the unit during
installation.