Installation manual

Rinnai Australia - 35 - Solar Split Systems Operating / Installation Manual
Sunmaster SG175 or SG215 with SGPKIT
Items Supplied with Cylinder Items Supplied in SGPKIT (cont…)
1
PTR Valve
1
Adaptor R ¾ x Rp ½
3
Nipple R ¾
1
Pump and Controller Assembly
(includes 2 x ½ Kinco nut and olive,
flow control valve and non return valve)
Temperature sensor lead (31002710)
included with assembly, but shown
separately as item 12 for clarity 39001735
1
Temperature Sensor with 2 m lead
Part of Pump and Controller Assembly
(39001735), but shown separately
for clarity 31002710
2
0
Gas Booster Mounting Brackets
1 x tabs bent
26601098
1 x tabs unbent 26601096
2
Elbow ¾ Rp x ¾ G flexi 21201012
Items Supplied in SGPKIT
2
Fibre Washer ¾ 17401008
1
¾ Kinco Olive 33001011
1
¾ Kinco Nut 16801018
1
Insulated Flexi Pipe 890 mm 11601070
1
Copper Tee
11603936
- 12
Screws 22601048
2
½ Kinco Olive 33001012
(*1 not needed)
- 3
Cable Ties 39601036
2
½ Kinco Nut
16801012
(*1 not needed)
* 2
Nipples
17201003
1
Insulated Copper
Extension Pipe
11603348
- 1
Saddle Clamp 27201015
- 1 Warranty booklet 15401024
- 1
Operation and
Installation Manual
15401030
- 1 RECS form 15401023
- 1
Booster and Pump Mounting
Instruction Sheet
15401031
- 1 Standardsmark Sticker 15802091
*This kit is used for a variety of installations. Items marked with an * are not needed for this particular installation
INSTALLATION & MAINTENANCE - GAS BOOSTED SYSTEMS