Installation manual

Rinnai Australia - 11 - Solar Split Systems Operating / Installation Manual
Table 3 - Model Numbers and Specifications
CHARACTERISTICS
Enduro / Equinox
(SP200A) or
(SP200A FTC)
Excelsior
(EXT OR EXT
FTC)
E-FROST
(HPFTC- 8-10)
TYPE
Flat plate Flat plate
Flat Plate /
Heat Pipe
- Waterways Copper Copper Copper
- Absorber Aluminium Copper Aluminium
- Selective Surface High Performance
Sputtered
Titanium Oxide
High Performance
Maximum Operating
Pressure
Casing Material
Overall Dimensions
(L x W x H) (mm)
1940 x
1025 x
80
1964 x
1047 x
81
1940 x
1025 x
80
Weight empty
(STD/FTC) (kg).
33 / 35 35 / 38 34
Water volume (Litres) 1.3 1.5 0.6
Number risers
810
10
Potential Solar Output at
PTR relief conditions (kW)
- 1 Collector (mm) 1940 x 1025 1940 x 1047 1940 x 1025
- 2 Collectors (mm) 1940 x 2130 1940 x 2174 1940 x 2130
- 3 Collectors (mm) 1940 x 3235 1940 x 3301 1940 x 3235
Commercial Systems
*Frost protection to -12°C.
Power must be on at the
pump and controller must
be in low temperature mode
(factory default).
1.25
Approximate Roof space Required: Length x Width
Refer to Figure 23 for details
Frost Protection
* FOR MORE INFORMATION ON FROST PROTECTION REFER TO
WARRANTY BOOKLET
* Standard version - no frost
protection
Frost Protection to -5°C
MODEL NUMBERS AND SPECIFICATIONS
CONSTRUCTION
850 kPa
Aluminium
SPECIFICATIONS FOR SOLAR COLLECTORS