Installation Manual
11
HE Series Infrared Gas Heater Installation and Operation Manual
The HE Series heater has been design certified to ANSI Z21.86 / CSA 2.32 Vented Gas-Fired
Space Heating Appliances (Vented Overhead Heater).
The HE Series heater may be installed for heating of an indoor residential garage, workshop, or
greenhouse. This heater can also be installed in light commercial / industrial locations.
This heater must of a residence, nor in a basement, mo-
bile home, or recreational vehicle.
This heater is not for installation in a Class 1 or Class 2 explosive environment. If the application
is in question, consult with local authorities having jurisdiction (Fire Marshall, inspection depart-
ment, insurance underwriter, or other authority having jurisdiction).
•
•
•
•
•
•
It is beyond the scope of these instructions to consider all conditions that may be encountered.
Installation must conform with local building codes or, in the absence of local codes, with the Na-
tional Fuel Gas Code, ANSI Z223.1/NFPA 54 in the U.S.A. The latest edition Electrical Code AN-
SI/NFPA N0 70 in the U.S.A. must also be observed.
Installation of this heater must conform to all heating installation procedures in this manual in-
cluding suspension, maintenance of clearance to combustibles, connection to the gas and electri-
cal supplies, and ventilation.
Revisions to codes and/or standards, may require revision to equipment and installation proce-
dures. In case of discrepancy, the latest codes, standards, and installation manual will take priori-
ty over prior releases.