Operating instructions
Rinnai New Zealand Limited Neo Operaon Manual: 11907-A
01-11
13
A/M PWRT P
DOWN
UP
OK
Displays current room temperature.
Indicates the wireless controller is transming to the
receiver. The symbol will appear in the LCD for one second.
Symbol will ash when baeries need
replacing. Wireless controller will remain
funconal for ve days (approx.) before
shung o.
Indicates ame height. When in manual or
automac modes, the heater will switch o
if the room temperature reaches the set
temperature. When this occurs, the ame
indicator will rise and fall every few seconds
to indicate the heater is sll operaonal.
When the controller is turned o the me
and date will sll display.
When the wireless controller is on,
the programmed temperature will be
displayed. In ame mode, only the ame
seng (F1-F7) will display.
Toggles between automac, manual, and
ame modes.
When in ‘ame mode’ the display will be
blank.
PWR and OK pressed together switches
the wireless controller on (child lock safety
feature). PWR switches the controller o.
UP/DOWN: Changes hours, minutes, day or temperature.
OK: Accepts the current funcon and advances to the next funcon.
Indicates programming mode, press and
hold for two seconds.
Iniates the me and day of the week
programming, press and hold for two
seconds.










