User manual

Using 4 Universal Temperature Controllers.

You will need to activate the fourth controller.

STEP 1:

STEP 2:

Note:

If the master controller is replaced, repeat STEP 1 above for the new controller.

TEMPERATURE CONTROLS - OPERATING

On the Master controller press and hold the Transfer and On/Off buttons

simultaneously (see fig. 2) until a “beep” is heard (approx. 5 seconds)

Check that the display on all Four controllers is lit

and displaying a temperature when switched on. If

any ONE of the controllers displays two dashes (see

fig. 1) in the display repeat STEP 1.

Fig. 1

Fig. 2