User manual

REU-V1616W/REU-V2018W/REU-V2020W - 32 - Issue 1 - 10/10/03 ©Rinnai

*Note 3 Water Flow Servo Positioning

To return to normal operation

• Press the ON/OFF button again while holding down the Water Temperature "DOWN" (Cooler)

button.

To return to normal operation.

• Press the ON/OFF button again while holding the Water Temperature “UP” (Hotter) button.

• This feature will automatically shut down after 3 minutes.

07 Water flow servo present recognising positioning None 0~2 *Note 3

Servo Position Open Centre Closed

Display “1” “0” “2”

08 Inlet water temperature

(PCB recognition value)

(Example 25 = 25°C)

°C 0~999

09 Hot water fan current flow value

(Example 6 x 10 = 60 mA)

10 mA 0~999

10 Bath fill amount (this counts the litres during bath

fill operation).

Litres 0~999

Error History

To Display Error Memory (History)

(This feature will show the last 10 faults in sequence)

1. Turn off at the ON/OFF button. (This can be done during

operation)

2. Press the ON/OFF button while holding the Water Temperature

"UP" (Hotter) button.

• The Sequence will be shown in the Water Temperature display.

• Error Code will be shown in the Clock display. (See service

Manual for error codes).

• Where there are less than a total of 9 errors, "FFF" or " - - " will

be displayed in the Clock display.

Service Manual Infinity 16e and 20e