User manual

– 28 –
PROGRAMING THE TIMERS : EXAMPLE
Note: Before programing the timers, the clock must be set to the correct time(see page 24).
The following is a step by step guide to programing the timers by an example schedule.
A general outline for programing the timers is provided on page 26.
If programing is paused for longer than 2 minutes the display will return to the current time,
and all programing up to that stage will be lost.
The times and temperatures in the EXAMPLE box below can be used for learning how to set the program
able thermostat.
EXAMPLE Let's use the following schedule to program the weekdays...
Press the “Timers” button once. The
display will show “Select Program
Timer” and the “Mo Tu We Th Fr Sa Su”
indicators will flash.
1
Press the “▲” button once, the “Mo Tu
We Th Fr” indicators will flash.
2
Press the “Select” button once, the period □
1
indicator will flash and the time and
temperature display will be shown.
3
Press the “Select” button again. The
period □
1
indicator will become stable,
the temperature display will go out and
the clock will flash.
4
Press the “▼” button until the display
shows “
am
5:30”(as shown in the
example schedule for period □
1
).
5
Press the “Select” button again. The clock
indicator will become stable, the pre-set
temperature will flash and “Select Program
Temp” will be shown.
6
EXAMPLE SCHEDULE
5:30 am
8:00 am
5:00 pm
9:30 pm
76°F
OFF
72°F
OFF
Time Setting Temperature
Periods
1
2
3
4
This example schedule is the same as the WEEKDAY PROGRAM on page 26.
Select
Program Timer
Tu We Th Fr SuMo Sa
Programming
Clock Select
Timers
Select
Program Timer
Tu We Th FrMo
Programming
Clock Select
Timers
am
Set
Select
Program Timer
1
Tu We Th FrMo
Programming
Clock Select
Timers
am
Select
Program Timer
1
Tu We Th FrMo
Programming
Clock Select
Timers
am
Select
Program Timer
1
Tu We Th FrMo
Programming
Clock Select
Timers
am
Set
Select
Program
Temp
1
Tu We Th FrMo
Programming
Clock Select
Timers