Specifications

Cleaning ODS Pilot Orifice
Caution: Shut off gas/power supply to the unit before proceeding. Wear safety glasses to preform
task below.
1. Remove front cover on unit (4) screws.
2. Locate pilot and burner orifice on the right hand side of unit, center of burner housing.
3. Blow out the orifices shown in picture 1 with 120 psi of compressed air. Hold the air nozzle back
at least six inches from all components to prevent damage from the high pressure air.
4. Install front cover and verify unit operates as designed.
2
Burner orifice
Pilot orifice