Specifications

Safety Features

• Self Diagnostic Circuitry-Should the ENERGYSAVER® detect an unsafe operating

condition, the unit will shut down and a fault code will display indicating the specific issue.

• If the code is due to an ignition or combustion failure, the unit will attempt to relight automatically

• Function/Child Lock

• Cool to the touch Cabinets

• Restricted air filter indication lamp and audible reminder-Current model ENERGYSAVERS

will flash a reminder lamp and emit an audible beep if it detects operational conditions

indicative of a restricted air filter.

• Sealed Heat Exchanger-flame and combustion is sealed from the heating area

• Overheat protection- Multiple temperature sensors monitor the appliance’s temperature.

Shut down occurs if an unsafe operational temperature is detected.

• Combustion and convection fan validation-should either of these fans fail to maintain the

proper speed (likely due to a restriction), the PCB will not allow the unit to operate

• Electronic ignition-no standing pilot

• Power failure protection-Should the ENERGYSAVER lose power, the gas supply will

automatically close. Upon resumption of power, the unit will automatically attempt to restart

• ENERGYSAVERS are equipped with an inline glass fuse and surge protection to protect from over-

current or power surge