Specifications

C-Series ENERGYSAVERS® have two primary methods of operation

• Exclusively as a thermostatically controlled furnace

• When left to operate on a continuous-run basis using feedback from its thermostat, the

ENERGYSAVER will achieve an optimum balance between comfort and efficiency

• As a programmable furnace with two separate timers and a setback function

• The timers allow two separate heating events to be set

• Timer 1 and Timer 2 (individually or both as needed) can then be engaged to allow the unit to turn on

and off for those events

• The ENERGYSAVER is designed to attempt to have the area at the set point temperature when the

timer event begins—meaning it could turn on several minutes earlier to achieve set point temperature

• To set the clock and timers, see the installation manual

• If needed, the Override button can be selected to temporarily turn on or off the timers to

allow manual operation

Clock, Timer, and Setback Functions

(C-Series)

• If the unit is operating during a Timer’s event, pressing Override will turn the unit off until the next

Timer’s event

• If the unit is off between Timer

events, pressing Override will

turn it on. It will continue to run

until the end of the next

Timer’s event and return to

Timer operation.

• If Override is turned off, the

unit will return to Timer

operation