Specifications
Standard Continuous Flow Gas Water Heater Range
The Rinnai standard VT range brings you the highest star ratings available in the country, giving you more savings and more
of what you need, for less. Our standard continuous flow systems includes Rinnai INFINITY® VT and HD gas hot water, which
provide a simple, clever way to enjoy a continuous flow of hot water. Forget storage tanks and the headache of running out
of hot water – with a Rinnai INFINITY® gas hot water system you’ll enjoy hot water whenever – and wherever – you need it.
STANDARD CONTINUOUS FLOW UNIT
Step by step
When a tap or shower is turned on, the system
instantly starts working as water starts to flow
through the appliance.
The combustion fan starts.
Ignition begins (this requires electricity) and
then a gas valve opens.
Once the flame is established the appliance will
heat the water as it is required by the digital
controller or until you turn off the tap.
CONDENSING CONTINUOUS FLOW UNIT
Step by step
Cold water enters the appliance.
Cold water travels to the secondary latent heat
exchanger where heat is transferred to the
cold water. The water temperature increases by
approximately 5°C.
Water flows to the primary heat exchanger and
is heated. As the water is preheated it uses less
energy to reach the required temperature.
The hot water keeps flowing until you turn off the
tap or the Digital controller turns off the system
for you.
Condensing Continuous Flow Gas Water Heater Range
This is our most efficient continuous flow system. Rinnai INFINITY® EF condensing continuous flow gas water heaters
effectively captures waste heat from the flue gas through the use of a secondary heat exchanger to help heat the water with
less energy. And the best bit? Heating your water with less energy can save you up to 72%
2
.
h
w
r
s
t
s
w
r
C
n
i
u
o
F
o
g
s
Hw