Installation guide

ManualsBrandsRinnai ManualsHome building and DecorEfficiencyHD250

34 | Rinnai Continuous Flow Water Heating Specication Guide 02-13

Rinnai Innity internal ueing components

953 ± 5 mm

483 ± 5 mm

Stainless steel inner

protrudes 10 ± 2 mm

Flue pipe clamp

Roof cowl

Code = FFSSROOFCOWL

Can be cut to size. Includes two black

injection pipe sections for covering

and protecting the white ﬂue pipe from

UV damage.

90 ° bend

Code = FFSSBEND90

PVC outer and stainless steel inner.

Zero clearance from combustibles. Flue

component overlaps by approximately

37 mm.

45 ° bend

Code = FFSSBEND45

Sold as a pair. PVC outer and stainless

steel inner. Zero clearance from

combustibles. Flue component

overlaps by approximately 37 mm.

Condensate trap kit

Code = FFSSCOND

Required for vertical ﬂue lengths over

1.5 m (excludes Rinnai Inﬁnity EFi250).

Flue pipe 1000

Code = FFSSPIPE1000

Can be cut to size. Includes Munzing

Ring (not pictured). PVC outer and

stainless steel inner. Zero clearance

from combustibles. Flue component

overlaps by approximately 37 mm.

Direct ﬂue kit

Code = FFSSKIT

Can be cut to size. Includes Munzing

Ring (not pictured). Terminal protrudes

approximately 175 mm from the wall.

778 ± 10 mm

480 ± 5 mm

120 ± 5 mm

Generic notes on ﬂueing components

- Flue dimensions:

• inner = 75 mm

• outer = 125 mm

- Construction, PVC outer and stainless steel inner.

- All ﬂue components have zero clearance from combustibles.

- Pipes overlap by approximately 37 mm—once joined the effective length

reduces by 37 mm, this needs to be factored when cutting to size.

- The roof cowl comes with two black UV injection moulded pipe sections for

covering and protecting the white ﬂue pipe from UV damage. If for some

reason any remaining white pipe is exposed to UV, this should be painted

with a suitable UV resistant coating.