Installation manual

Rinnai Australia 17 Energysaver® - Operation & Installation Manual
Specification Table
NOTE: For other appliance Specifications refer to appliance data plate.
General
RHFE-309FT RHFE-559FT
Dimensions 695mmH x 257mmD x 465mmW 582mmH x 257mmD x 760mmW
Weight 21 kg 26 kg
Gas Control valve Rinnai
®
Electronic Modulating Gas Control Valve
Burner Fabricated Stainless Steel – Bunsen Burner Type
Gas Inlet thread R1/2 Male (15mm)
Flue System
Fan assisted, twin chamber co-axial flue system, provides air for combustion
to the appliance and allows expulsion of combustion products to
atmosphere. Results in ‘room sealed’ appliance.
Ignition Direct continuous spark electronic ignition – no pilot.
Electrical supply
240V 50Hz with supply lead and 3 pin plug. Replace with Rinnai
®
genuine part.
Standby power
consumption
<1W
Convection fan Centrifugal Drum Type Fan Cross Flow Fan
Temperature range 16°C - 26°C x 1°C Increments
The manufacturer reserves the right to change or modify specifications without notice.
SPECIFICATIONS